Victoria experienced the eighth-warmest year ever since the establishment of records in 1910 in 2025. The mean temperature of Victoria was recorded to be 0.94 degrees Celsius above the 1961-90 average. In addition, the Bureau of Meteorology recorded 41.5 degrees Celsius at Melbourne Airport on 27 January. These values represent air temperatures. They don’t include temperatures of metal fixed to an external wall. Determination of the most suitable window shroud needs consideration of climate impacts on the material used, its finish and building location.
What The Climate Record Does And Does Not Say?
Annual mean temperatures cannot reflect the full spectrum of conditions in Melbourne. The maximum temperature recorded in Olympic Park in 2025 was 39.8 degrees. The minimum temperature recorded was 1.6 degrees in August. This represents a variation of more than 38 degrees of air temperature in the same location.
Temperatures recorded for metal surfaces are quite different from those of the air. For instance, a dark shroud attached to a west-facing wall can be heated more by direct sunlight. Therefore, annual air temperatures cannot provide information on how much the particular shroud will expand or how long the coating will last. Technical data provided by the manufacturer or information from facade engineers is required by window shrouds Melbourne buyers to determine answers to those questions.
The climate conditions also vary in different locations even in the same city. The mean maximum temperature recorded for Melbourne Airport was 1.3 degrees above the average. For Olympic Park, the figure was 0.5 degrees above average. A west-facing wall near a car park may experience totally different conditions compared to a shaded wall facing a courtyard. According to the City of Greater Bendigo, it is advisable to shade windows facing north and west directions. This can be achieved through eaves, awnings and outdoor blinds.
The Bureau’s 2025 summary includes average temperatures and maximums, but it does not have a number of hot days.
A Dry Year Is Not A Dry Window
Victoria had an average annual rainfall of 544.6 millimetres in 2025, 18% below the 1961-90 average. Dry years may encourage property owners to neglect checking sealants and drainage gaps. However, according to the Victorian Government’s climate science report, the intensity of rain events has increased. Intense rainfall increases pressure on the junction below a shroud, where the actual weatherproofing system is installed.
The Buyer’s Checklist For Specifications

The annual climate statistics will not be enough to conduct an evaluation of the building. Buyers have to pose six questions prior to deciding on their specification:
- Orientation and exposure to the sun. Which walls face afternoon sun and whether or not the finish chosen is appropriate to that exposure?
- Wind. What is the wind class of the site, and does the fixing design meet those criteria?
- Material and coating. Is the material and coating appropriate to the location and what is covered by the warranty?
- Coastal exposure. Are the properties near the bay excluded from warranty coverage depending on the distance from the sea?
- Drainage and shedding of water. What will be the way for water drainage from the sill and the corner?
- Bushfire requirements. Is there a chance for Bushfire Attack Level restrictions to limit the material choice in mapped areas?
Aluminium does not corrode as quickly as steel. The coating protects steel from the process. If the scratch makes the coating go off and shows the metal underneath, the damage starts at that point. The cut edges and drillings also need attention since they can expose the metal underneath.
Commercial Buildings Increase The Importance Of The Matter
In case a building has numerous lines of window surrounds, the same minor flaw can occur several times on various floors. Repair work at higher levels also becomes more expensive due to the use of special equipment. Owners’ corporations in apartment buildings have similar issues and may require documentation to evaluate various repair and replacement alternatives. Arriving at the agreement about the maintenance schedule in writing beforehand will help.
A Seasonal Inspection That Takes Ten Minutes
It would be appropriate to carry out an inspection of the outside window frames during spring because at this time there might have been windy and rainy weather. It is necessary to inspect the sealant, loose fixings, bubbled paint, and stains from the corners. An inspection carried out during late summer will help identify any fading and warping of the material before the autumn storms set in. It would also be helpful to take pictures on the same date annually.
One must inquire about what type of weathering the material is supposed to withstand. The answer must be in writing. No property in Melbourne endures just one kind of exposure.




